hack heck

To speed up your hard disk speed we need to configure a special buffer in the computer’s memory in order to enable it to better deal with interrupts made from the disk.
This tip is only recommended if you have 256MB RAM or higher.
Follow these steps:
Run SYSEDIT.EXE from the Run command.

Expand the system.ini file window.

Scroll down almost to the end of the file till you find a line called [386enh].

Press Enter to make one blank line, and in that line type

Irq14=4096

Note: This line IS CASE SENSITIVE!!!

Click on the File menu, then choose Save.

Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.
Update: The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks. In any case, it won’t harm your system, so why not try it yourself and let me know what you find

this topic may delete if any request from any authorized request.

Wireless Hacking Live – FBI version ISO

Live Cd For Wireless Hacking, Also Used By The FBI

This version is for all systems except systems with the Intel B/G wireless cards (IPW2200).
- Live CD with all the tools you need to hack a WLAN / wireless Access point – Linux Live-CD – OS runs from CD – 635 mb – .iso
- also used by the FBI.

WEP Hacking – The Next Generation
WEP is an encryption scheme, based on the RC-4 cipher, that is available on all 802.11a, b and g wireless products. WEP uses a set of bits called a key to scramble information in the data frames as it leaves the access point or client adapter and the scrambled message is then decrypted by the receiver.

Both sides must have the same WEP key, which is usually a total of 64 or 128 bits long. A semi-random 24 bit number called an Initialization Vector (IV), is part of the key, so a 64 bit WEP key actually contains only 40 bits of “strong” encryption while a 128 bit key has 104. The IV is placed in encrypted frame’s header, and is transmitted in plain text.

Traditionally, crac*ing WEP keys has been a slow and boring process. An attacker would have to capture hundreds of thousands or millions of packetsa€”a process that could take hours or even days, depending on the volume of traffic passing over the wireless network. After enough packets were captured, a WEP crac*ing program such as Aircrac* would be used to find the WEP key.

Fast-forward to last summer, when the first of the latest generation of WEP cracking tools appeared. This current generation uses a combination of statistical techniques focused on unique IVs captured and brute-force dictionary attacks to break 128 bit WEP keys in minutes instead of hours. As Special Agent Bickers noted, “It doesn’t matter if you use 128 bit WEP keys, you are vulnerable!”

WEP is an encryption scheme, based on the RC-4 cipher, that is available on all 802.11a, b and g wireless products.
WEP uses a set of bits called a key to scramble information in the data frames as it leaves the access point or client adapter and the scrambled message is then decrypted by the receiver.

Both sides must have the same WEP key, which is usually a total of 64 or 128 bits long.
A semi-random 24 bit number called an Initialization Vector (IV), is part of the key, so a 64 bit WEP key actually contains only 40 bits of “strong” encryption while a 128 bit key has 104.
The IV is placed in encrypted frame’s header, and is transmitted in plain text.
Traditionally, cracking WEP keys has been a slow and boring process.
An attacker would have to capture hundreds of thousands or millions of packets a process that could take hours or even days, depending on the volume of traffic passing over the wireless network.
After enough packets were captured, a WEP cracking program such as Aircrack would be used to find the WEP key.
Fast-forward to last summer, when the first of the latest generation of WEP cracking tools appeared.
This current generation uses a combination of statistical techniques focused on unique IVs captured and brute-force dictionary attacks to break 128 bit WEP keys in minutes instead of hours.

Basic Directions:
1)Boot from cd
2)get the wep key
3)write it down
4)reboot into windows
5)connect using wep key.

Note: if you have problems burning the ISO, convert the ISO using Magic ISO to nrg image, before burning.

Size : 626 MB(6X100+26)

http://w14.easy-share.com/1702310530.html

http://w14.easy-share.com/1702310652.html

http://w15.easy-share.com/1702310933.html

http://w15.easy-share.com/1702311051.html

http://w18.easy-share.com/1702311340.html

http://w18.easy-share.com/1702311421.html

http://w15.easy-share.com/1702311417.html

or

http://letitbit.net/download/1153f4429994/Wireless-Hacking-Live-CD.part1.rar.html

http://letitbit.net/download/b249be942258/Wireless-Hacking-Live-CD.part2.rar.html

http://letitbit.net/download/fa2685297205/Wireless-Hacking-Live-CD.part3.rar.html

http://letitbit.net/download/dd7c18588167/Wireless-Hacking-Live-CD.part4.rar.html

http://letitbit.net/download/6e7b35895129/Wireless-Hacking-Live-CD.part5.rar.html

http://letitbit.net/download/a1d4bd495220/Wireless-Hacking-Live-CD.part6.rar.html

http://letitbit.net/download/6f054e37243/Wireless-Hacking-Live-CD.part7.rar.html

Ejection of CD or DVD some times becomes tiring action as you need to physically press the button on the CD/DVD writer or reader to open the tray and then to close the tray also in some of the CD/DVD writer or reader.

Today, We will tell you how can you create shortcuts to eject and close the CD/DVD Tray and we will also share some FREE utilities which do the eject and close the CD/DVD Tray any time.

By Default Windows vista allows you to easily eject the CD/DVD Drive by right clicking the CD/DVD drive and select Eject in the context menu. But there is no Close Tray option to close the CD/DVD tray. But you add the option to close the tray using CloseTray.

In order to add the option Close Tray in the right click context menu follow the procedure given below.

1. Download closetray.zip and extract it.

2. Double-click closetray.reg to add it to registry.

Note: It may require restart for the settings to come into effect

If you want to create desktop shortcut to eject or close CD/DVD drive tray then there are hell lot of ways to do that.

Lets discuss all of them one by one and some other utilities for the same purpose.

There are two FREE utility which lets you create desktop shortcuts to Eject or Close CD/DVD tray. Two Programs which lets you perform some basic tasks in windows are NirCmd and Wizmo you can download NirCmd from here and download Wizmo from here

Download one of the above application mentioned above and create the following shortcuts for Closing and Ejecting of CD/DVD drive.

Follow the procedure below to create desktop shortcuts for Eject and Close the CD/DVD Tray.

1. Right Click on the empty desktop area and Select New >> Shortcut

2. You will now be prompted to type the location in the target box

With NirCmd, you will need to append the following text to the end of the path.

CD/DVD Tray Close Shortcut type the following path in target box

“C:\Program Files\NirCmd\nircmd.exe” cdrom close

CD/DVD Tray Open Shortcut type the following path in target box

“C:\Program Files\NirCmd\nircmd.exe” cdrom open D:

With Wizmo, you will need to append the following text to the end of the path

CD/DVD Tray Close Shortcut type the following path in target box

“C:\Program Files\Wizmo\wizmo.exe” close

CD/DVD Tray Open Shortcut type the following path in target box

“C:\Program Files\Wizmo\wizmo.exe” open=D:

3. Click Next and then Finish.

There are lot more other utilities which lets you eject the CD/DVD tray more easily like EjectCD which is a small command utility you can download and create a desktop shortcut.

Create a Eject Shortcut With EjectCD

1. Download EjectCD.exe from here

2. Right click on EjectCD.exe and select Send To >> Desktop (Create Shortcut)

3. That’s now you have a desktop shortcut to eject the CD/DVD drive.

There are lot more other free softwares to eject the CD/DVD tray which you can google out if above program does not fit your needs or you may want just more than shortcuts to eject and close CD/DVD tray.

The word BETA means it is tested for bugs, crashes, errors, inconsistencies, and any other problems before releasing it out to the public as stable version. There are 3 situations that I’d never use a BETA and that is an operating system, patches/updates and security software (antivirus and firewall) Download Windows 7 Until today I was never satisfied with Windows Vista, so I was curious to test out Windows 7 and see if it could be as good as Windows XP. I don’t want to mess around with the master boot records to create a dual boot and also re-partitioning my hard drive for extra space to install Windows 7. The best way is to test drive Windows 7 in a virtual environment. Today I will show you step by step on where to download Windows 7, how to get Windows 7 product key for activation and how to install it on VirtualBox so you can mess around with it. I chose VirtualBox because it’s free and also much easier to use compared to other virtualization software.Before you start, please make sure that your computer is faster than 1 GHz processor and has more than 1 GB of system memory to install and run Windows 7 Ultimate.

Download, Install and Configure VirtualBox for Windows 7 Installation
1. Download and install VirtualBox.

2. Run VirtualBox and click New button.

3. Click Next

4. Enter the name as Windows7, select Operating System as Microsoft Windows and select Other Windows for Versions.

5. Depending on how much RAM is on your computer. My computer has 2GB and I could only set 1018MB. The Next button will be inaccessible if I set more than that value. Try setting as high as possible so that running and installing Windows 7 would be faster.

6. Click New button to create a virtual hard disk.

7. Click Next

8. Select “Dynamically expanding storage” and click Next.

9. Select the size of the virtual hard disk. I set is as 10GB but if you can set it higher if you have more to spare.

10. Click Finish and you’ll be brought back to Virtual Hard Disk. Click Next.

11. Click Finish.

12. Make sure that Windows7 is selected at VirtualBox and click Settings button.

13. Go to CD/DVD-ROM, check “Mount CD/DVD Drive” and select ISO Image File. Click the small folder icon.

14. Virtual Media Manager window will appear. Click Add button and browse for the Windows7 ISO file that you downloaded and click Open. Click Select.

15. Now you’re back to the Settings to configure the options for Windows7. Click Network.

16. Make sure that “Enable Network Adapter” is checked. Click on Adapter Type drop down box and select Intel PRO/1000 MT Desktop (82540EM). Windows 7 doesn’t include drivers for PCnet-Fast III.

17. Click OK to close the VirtualBox Settings for Windows7.

Install Windows 7 Beta Build 7000 on VirtualBox
1. Make sure that Windows7 is selected at VirtualBox and click Start button. You will see a bar saying Windows is loading files.

2. When it has finished loading the required files, you can select the language to install, time and currency format and keyboard or input method. Click Next when done.

3. Click Install now

4. Check “I accept the license terms” and click Next.

5. Select Custom (advanced).

6. Select the drive that you created from VirtualBox and click Next. Windows 7 setup will start copying files, expanding files, installing features, installing updates and completing installation.

7. Enter your user name, computer name and click Next.

8. Enter your password and hint.

9. Enter the 25-digit Windows 7 Product Key that you got earlier and click Next.

10. Select “Ask me later”

11. Review the time and date settings. If it is correct, click Next.

12. Windows 7 will now finalize your settings and voila! You have Windows 7 running in VirtualBox.

we have found another hack for free Unlimited GPRS for Airtel live users. The new trick for Airtel free internet is as simple as installing a software on your Cell phone. Actually the trick is to install a Mobile Web Browser called Teashark or Ucweb on your Cellphone.

Follow the steps below for unlimited mobile browsing.

1. Download Teashark browser(for MIDP 2.0 handsets only) from here or from wap.teashark.com if you are using mobile browser.

2. Install the browser and select Airtel Live as the access point and start browsing absolutely free (Don’t worry airtel won’t charge you).

Note: If Teashark browser doesn’t work then go for Ucweb browser which can be downloaded from here. They also have many features like built-in download manager ,search function,email service and also page saving options.

Do you still use different media players for playing different media files? like playing mp3’s with winamp,DVD media files with Nero showtime or cyberlink and playing cryptic media formats with VLC ? Well,no need to do it now,for your vanilla Windows Media player can play all of them,by using K-lite mega codec Pack.

The K-Lite Codec Pack is a collection of DirectShow filters, VFW/ACM codecs, and tools.K-Lite Mega Codec Pack 4.4.5 – More downloads at software sectionThe K-Lite Codec Pack is designed as a user-friendly solution for playing all your audio and movie files.With the K-Lite Codec Pack you should be able to play all the popular movie formats and even some rare formats. Just install K-lite Mega Codec Pack,choose your flavor for the install and you are set to go.You have the ultimate Windows Media player then.

K-Lite Mega Codec Pack includes the Full K-lite codec pack as well as Quicktime and Realplayer codecs and BS Player. K-Lite Mega Codec Pack includes codecs for the most popular compressions like Divx and Xvid as well as some of the less popular but still necessary codecs. This is your one stop codec resource.

The K-Lite Mega Codec pack supports these formats -

• AVI (.avi .divx)
• MPEG-PS (.mpeg .mpg .m1v .m2v)
• MPEG-TS (.ts .m2ts)
• Matroska (.mkv .mka)
• MP4 (.mp4 .m4v)
• Ogg (.ogm .ogg)
• DVD/VCD/XVCD (.vob .dat)
• Flash Video (.flv)
• QuickTime (.mov .hdmov)
• RealMedia (.rm .rmvb .ra .ram)
• 3GP (.3gp .3gpp .3g2 .3gp2)
• MP3 (.mp3)
• MPEG-4 Audio (.m4a .aac)
• FLAC (.flac)
• MusePack (.mpc .mpp)
• WavPack (.wv)
• OptimFrog (.ofr .ofs)
• Monkey’s Audio (.ape)
• True Audio (.tta)
• Apple Lossless Audio Codec (.alac)
• AC3/DTS (.ac3 .dts)
• 3 AMR (.amr)
• AMV (.amv)Trackers (.xm .s3m .it .mod .umx)

Download Klite Mega Codec Pack

This guide will show you how to convert you standard Nokia N73 to the N73 Music edition.

The benefits of converting to the N73 Music Edition include:

• Improved music player – The new music player handles music by artist/genre/album. It also has an enhanced equaliser with bass boost and stereo widening.
• Removes operator branding – If you purchased a phone from a network operator such as T-Mobile you will more than likely have custom T-Mobile firmware on the phone which restricts the usage of certain features on the phone.
• New themes – I quite liked the new themes included with the music edition.
• Easy Access to the MP3 player – The shortcut key on the right now loads the MP3 player up.

You will need:

• Nokia PC Suit – this can be downloaded from: Nokia Europe – Nokia PC Suite – Support
• Nokia Software Updater – this can be downloaded from: Nokia Europe – Device software update – Support
• Nemesis Service Suit – download

Walkthrough:
Before you begin be sure to backup anything important that is saved on the phone memory such as your contact as the phone memory will be erased during this process.

This guide will presume you have connected your phone to your pc using the data cable that came with the phone and have installed the Nokia PC Suit and Nokia Software Updater. If you have not done this download the Nokia software updater now, after the installation has completed you will be guided through connecting your phone to the pc, be sure to use the data cable and not Bluetooth.

If you have completed the above you can now install Nemesis Service Suit make, sure you have closed the Nokia PC Suit before doing this.
Continue through the installation until you reach the hardware selection page, select “Virtual USB Device” and finish the rest of the installation.

Now connect the phone via the data cable and select PC Suit mode, if any drivers are installed wait for this to finish then load up Nemesis Service Suit.

Once Nemesis has loaded you should see something like the screenshot below, click the scan for new device button below as shown in the screenshot.
If your phone is not found check it is in PC Suit mode and that you can connect to the phone with Nokia PC Suit, its also worth mentioning that the latest version of Sophos Antivirus stops Nemesis Service Suit from working correctly, I’m not sure if this is the case with other antivirus packages but if you have having problems connecting to the phone it might be worth disabling your antivirus software when using Nemesis.

Once the phone has been found click “Phone Info” as shown below

On the phone info screen click scan, then click read and check the box next to product code

Now you must enter product code

Music Edition: 0539343

If English is not your preferred language it might be an idea to change to the product code for the country you live in. As this is quite a big list I have included this in the attached text file in this post.

Once you have entered your desired product code click write to save the changes to the phone

Your phone is now ready to be flashed with the latest Nokia firmware without operator branding and restrictions!

Load up Nokia Software Updater and follow the steps to flash your phone.

Congratulations you have now converted your N73 in to the N73 Music edition (and removed the operator branding if your phone had any before)

If you created a backup of the phone memory before you converted to the music edition or de-branded your phone do not restore that backup as it is possible to brick your phone as the backup is from a different firmware.

Yes, firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more?

That’s the beauty of this program being open source.
Here’s what you do:
In the URL bar, type “about:config” and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox.

Note that these are what I’ve found to REALLY speed up my Firefox significantly – and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections – I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection.

Double Click on the following settins and put in the numbers below – for the true / false booleans – they’ll change when you double click.
Code:
browser
.tabs.showSingleWindowModePrefs – true
network.http.max-connections – 48
network.http.max-connections-per-server – 16
network.http.max-persistent-connections-per-proxy – 8
network.http.max-persistent-connections-per-server – 4
network.http.pipelining – true
network.http.pipelining.maxrequests – 100
network.http.proxy.pipelining – true
network.http.request.timeout – 300

One more thing… Right-click somewhere on that screen and add a NEW -> Integer. Name it “nglayout.initialpaint.delay” and set its value to “0”. This value is the amount of time the browser waits before it acts on information it receives. Since you’re broadband – it shouldn’t have to wait.

Now you should notice you’re loading pages MUCH faster now!

Fed up with free anti-virus solution giveaways with subscription period validity of just 3 months, 6 months or 1 year? Most security product developers nowadays attracts user with several months of free usage promotional offer, and then require user to pay an annual subscription fee to continue using the product or to receive the virus signature update.

Instead of succumbing to search for new free license key, serial number or activation code every other few months when the subscription period expires or ends, here’s one license key number like no other, for AVG Anti-Virus users. We receive tip off that the following license number for AVG Anti-Virus will only expire on February 26, 2018, a full 10 YEARS validity and free usage. For AVG lovers who installed AVG Anti-Virus by using the one year free subscription license which going to expire by December 1, 2008, the ultimate serial key for AVG is just in time.

It’s unclear if the super long activation license key for AVG AntiVirus is part of what promotion, or it’s a leaked serial key. Anyway, the license number will activate a full version of AVG Anti-Virus 8.0, and most likely all its future upgraded version or new releases. There are a total of 145,000 licenses available.

To use AVG Anti-Virus for free for 10 years, just download and install the latest version of AVG Anti-Virus setup installer (current version 8.0.196: avg_ipw_stf_all_8_196a1383.exe) from AVG paid version installation file download page.

When prompt for license number during installation, enter the following serial key:

8MEH-REDSL-7ETEC-ULA8R-EAOKL-4EMBR-ACED

Once installation is completed, AVG Anti-Virus full retail edition will have the license expiry date of 2/26/2018.

AVG Anti-Virus 7.5 is an older version of AVG security solution, but it continues to be a working and continuously updated and supported product from AVG. AVG Anti-Virus for home security works only in Windows Vista, Windows XP, and other workstation or client based Windows operating system. To use AVG on server based OS, AVG Network Edition is required. AVG AntiVirus 7.5 provides centrally controlled security protection against viruses, worms, trojans and potentially unwanted programs.

My Digital Life has published a trick to use AVG Anti-Virus 8.0 for free for 10 years till 2018. For administrator or people who needs a for server network edition of AVG, or user who feels that earlier version of AVG is in fact more efficient and has less problem, there is another license serial number for AVG 7.5 that works until July 8, 2112, a incredible 100 years of continuous update of virus signature database.

Download and install AVG Anti-Virus Network Edition 7.5: avg75f_552a1398.exe (version 7.5.552)

During installation, using the following serial number product key to activate the AVG Anti-Virus Network Edition 7.5 as full version product which expires on 7/8/2112. Number of license count available is 100.

70-THXMV1-P5-C21-SHXFW-DXU-M72F

Almost everyone who has worked with computers for any length of time at all has run into at least one situation in which a problem left a PC unbootable. What if you could return the machine to a bootable state just by inserting a USB flash drive though? Believe it or not, it is actually possible to install a bootable copy of Windows XP

onto a flash drive and then boot a PC off of the flash drive. From there, you can use applications

that you have installed on the flash drive (anti virus, anti spyware, disk repair, etc.) to fix the PC’s problem. In this article, I will show you how.

What’s the catch?

As with most cool new techniques, there are a few catches. For starters, not every PC is capable of booting from a USB flash drive. For the most part, computers manufactured within the last two years are generally able to boot from a flash drive. Older systems may require a BIOS update, or might not be able to boot from a flash drive at all.

Another catch is that not every flash drive will get the job done. The primary factors that limit your use of a particular flash drive are capacity and speed. Technically, speed isn’t really a limiting factor, but booting Windows will be painfully slow unless you use a flash drive that supports USB 2.0.

The flash drive’s capacity is actually a limiting factor though. Surprisingly though, there are size limits on both the upper and lower end. Your flash drive can’t be too large or too small. There isn’t really a documented minimal size for a flash drive. You just need something large enough to hold Windows XP and a few applications. As you probably know, Windows XP normally consumes over a gigabyte of disk space. Later I will show you how to use a free utility to trim the excess fat off of Windows XP and make it a whole lot smaller. Even so, I still recommend that your flash drive be at least a minimum of 256 MB in size.

As I mentioned, there is a maximum size for the USB flash drive that you can use. Currently, USB flash drives exist in sizes of up to 4 GB, and 8 GB flash drives are expected to be available by the end of the year. As nice as it would be to have 8 GB to play with, the flash drive that you use for this project can be no larger than 2 GB. The reason for this is because you will have to format the flash drive using the FAT-16 file system, which has a 2 GB limit. Presently, you are stuck using FAT-16 because most computers will not recognize a flash drive as being bootable if the drive is formatted with anything other than FAT-16.

Preparing your Windows installation CD

One of the requirements for creating our bootable USB flash drive is a Windows XP with Service Pack 2 installation CD. If your Windows XP installation CD doesn’t already include Service Pack 2, then you will have to make a CD that includes Service Pack 2 through a technique called slipstreaming.

Other requirements

In addition to your Windows XP installation CD, there are a couple of other things that you are going to need. For starters, you will need the HP USB Disk Storage Format Tool. You can download this tool for free.

Another utility that you are going to need is Bart’s Preinstalled Environment Bootable Live Windows CD / DVD, or BartPE for short. You can download this utility for free from the BartPE Web site.

In addition to the software requirements, you must verify that the PC that you will be using to create the Windows deployment has 1.5 GB of free hard disk space (minimum) and supports booting from a USB device. I also strongly recommend that the PC be running Windows XP Service Pack 2. Prior to Service Pack 2, Windows XP sometimes had trouble interacting with USB storage devices.

Formatting the flash drive

Now that you have all of the prerequisites taken care of, it’s time to actually start setting up our flash drive. The first step in doing so, as strange as it sounds, is to format the flash drive. Windows will actually let you format a flash drive in the same way that you format a floppy disk. However, formatting a flash drive in this way will not work for this project. Furthermore, using Windows to format a flash drive directly has been known to destroy some types of flash drives.

Instead, you must format the flash drive by using the HP USB Disk Storage Format Tool that you downloaded earlier. To do so, simply open the utility, select the device followed by the FAT file system option and click Start.

Once the device has been formatted, you must make it bootable. To do so, you must copy the BOOT.INI, NTLDR, and NTDETECT from the root directory of your PC’s boot drive to the flash drive. These files are hidden by default, so you will either have to configure Windows Explorer to show hidden files (including protected operating system files) or you will have to open a Command Prompt window and use the COPY command to copy the files.

If you choose to use the Windows Explorer method, then open Internet Explorer and enter C: into the address bar so that you are looking at your local hard drive. Next, select the Folder Options command from the Tools menu. When the Folder Options properties sheet opens, select the View tab. Now, just select the Show Hidden Files and Folders and deselect the Hide Extensions for Known File Types and the Hide Protected Operating System Files check boxes. Click OK to continue.

Booting from the USB flash drive

Now that you have formatted your USB flash drive and installed the boot files onto it, the next thing that you must do is to configure your PC to allow you to boot from the flash drive. This is all done through the computer’s BIOS Setup. I can’t give you specific instructions for this part, because every computer is different. I can give you a few pointers though.

You can access your computer’s BIOS by pressing a specific key immediately after you turn the PC on. The key varies, but it is usually either [F1], [F2], or [Delete]. Once you are in the BIOS Setup, you should verify that all of your computer’s USB options are enabled. This might include things like support for legacy USB devices or support for USB 2.0. If there is a time out setting for USB devices, you should set it to the max to insure that the system doesn’t time out while waiting on the USB device to boot.

Next, find the section on boot device priority. Normally, a USB flash drive (which is usually listed as USB-HDD, but may be listed as a removable device) will have a very low boot priority. If the USB flash drive’s boot priority is lower than the hard disk (listed as HDD) then the only time the computer would ever boot off of the USB flash drive is if the system were to fail to boot from the hard disk. You must therefore rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

Configuring Windows

Now that we have finally made it through all of the prep work, it’s time to start setting up Windows. As you have probably already guessed, the process of installing Windows to a flash drive is quite a bit different from your normal, run of the mill installation. There are a couple of reasons for this.

For starters, a full blown Windows XP deployment takes up over a Gigabyte of hard disk space. When you are installing to a flash drive, disk space is a scarce commodity. Even if you have over a Gigabyte of space on your flash drive, you probably don’t want to use it all on Windows. It would be nice to have room to install a few applications. Therefore, you need to trim the excess fat off of Windows.

The other reason why the installation process is so different from the usual Windows installation is because Windows Setup is not designed to install Windows to a flash drive. You therefore have to configure Windows using an alternate method.

The PEBuilder utility that you downloaded earlier can take care of both of these issues. PEBuilder is designed to create a build of Windows XP (or Windows Server 2003) that does not take up as much space as a full blown installation. Once you create this new build, you can copy it to the flash drive. For right now, I will show you how to create a basic Windows build and copy it to the memory stick. Unfortunately, it’s rather difficult to install applications once Windows is up and running. Therefore, after I show you how to create a basic Windows build, I will show you how to create a build that includes some applications.

Begin the process by opening PEBuilder. When you open PEBuilder, you will see a screen similar to the one that’s shown in Figure A. Simply enter the path to the Windows installation files (the ones from your Windows XP with Service Pack 2 installation CD). Next, verify that the Create ISO Image and the Burn to CD check boxes are not selected and then click the Build button. PEBuilder will now create the new Windows build.

You must use PEBuilder to create a Windows build that will work with a flash drive.

Now, it’s time to copy Windows to the flash drive. To do so, you will have to use a special batch file that’s included with PEBuilder. Open a Command Prompt window and navigate to c:\pebuilder313\plugin\peinst. Now, insert an empty flash drive into the computer’s USB port and then execute the file PEINST.CMD. You will now see a menu appear as shown in Figure B.

PEBuilder uses a batch file to install Windows onto a flash drive.

Type 1 and press [Enter] and you will be prompted to enter the path to the build that you have created. Enter C:\pebuilder313\BartPE. Now, type 2, press [Enter], and you will be prompted for the target path. Enter the drive letter that Windows has assigned to your USB flash drive. After doing so, the menu is updated as shown in Figure C. The menu now displays the source path and the destination drive. Type 5 and press [Enter] to install Windows to the flash drive.

Use menu option 5 to install Windows to the flash drive.

Installing applications

Now that I have shown you how to create and install a basic Windows build, I want to talk for a moment about how you can add an application to the build (prior to creating it). The PEBuilder program comes pre-configured to support a number of common Windows applications, but does not come with the applications themselves.

The reason why installing applications can be a little bit tricky is because most Windows applications modify the Windows registry. The build that you are creating is basically a collection of installation files, and the build itself does not contain a registry (the registry gets created when Windows is installed onto the flash drive). As such, PEBuilder uses a sort of registry emulator.

If you go to the C:\PEBUILDER313\PLUGIN folder, you will see sub folders for a number of different applications. If you open one of these application folders, you will see that the folder contains an INF file and a FILES folder. The INF file contains all of the information that would normally go into the registry, and the FILES folder stores all of the program’s files.

To see how this works, let’s install an application that I’m sure most of you are familiar with; Nero. Begin by installing Nero onto the machine that’s running PEBuilder, as if you planned to run Nero locally on that machine. When the installation completes, copy all of the files from C:\Program Files\ahead\Nero to C:\pebuilder313\plugin\nero burning rom\files. In this particular case, the nero burning rom folder is the folder that has been set aside for the Nero application. The Files sub folder is intended to store Nero’s system files.

Now, you must take care of Nero’s registry entries. To do so, go to the C:\pebuilder313\plugin\nero burning rom folder and open the PENERO.INF file using Notepad. As I explained earlier, the INF file in an application’s folder is used to store the application’s registry entries. For Nero and all of the other applications that PEBuilder predefines, the INF file is pre-configured. You just have to make a few changes that are specific to your system.

In this particular case, the PENERO.INF file is designed to support both Nero versions 5.x and 6.x. Initially, the lines for both versions are commented out. You must therefore determine which version you have and then remove the semi colon from the beginning of the lines that apply to that version. If you look at Figure D, you can see how the two versions are separated.

Figure D

An application’s registry entries are stored in an INF file.

Once you uncomment the appropriate lines, just replace “Your Name”, “Your Company Name” and “Your Serial Number” with your name, your company’s name, and your Nero product key. Save the file, and your set to go. The next time that you click the Build button, Nero will be included in the build.

Putting XP in your pocket

Running Windows from a flash drive isn’t an exact science. Sometimes the process just doesn’t work and there is no good reason why. As more PCs start to support booting from USB devices though, USB boots should become more standardized, and the technique should become more reliable.

Following are the list of usernames and passwords of the premium accounts for Best downloads sites.
…!! ENJOY !!…
!!…100% Working Accounts…!!

1.) www.divxcrawler.com {download movies fastly}

Username : divx273
Password : 8342729

2.) www.butterflydownloadnetwork.com {movies, music, Pc Games, Tv shows}

Username : cinemanetwork20
Password : butterfly20

3.) www.downloadprofessional.com {movies,Pc softwares, Pc Games, Tv shows}

Username : lo886Ees
Password : zAgt88er

4.) www.sharingzone.net {movies, Pc softwares, Pc Games}

Username : LODMQYHX
Password : 375021402
Receipt : 4T5W89RD

5.) www.unlimitedgamedownloads.com {movies, Pc Games, psp softwares}

Username : ga20me
Password : ke01feb

6.) www.watchdirect.tv {movies, music, Pc Games, online Tv}

Username : cinemanetwork20
Password : butterfly20

7.) www.fullreleasez.com {Greatly Every thing}

Username : Af872HskL
Password : XjsdH28N

8.) www.fulldownloads.us {Greatly Every thing}

Username : Af872HskL
Password : XjsdH28N

9.) www.pirateaccess.com {Every thing}

Username : yourfrienddalat@gmail.com
Password : CHh5LKPI

Username : xxx_heel_xxx@yahoo.com
Password : MJY0BUY

Username : i_l0ve_u_786@yahoo.com
Password : rYvLgPrt

Username : mubashar_siddique@yahoo.com
Password : F9Gzgwb5

10.) www.warezquality.com {Every thing}

Username : ageg2020
Password : z8fsDfg3

11.) wwww.warezreleases.com {All Stuff}

Username : HnRPxKQz
Password : a59KBV7

Username : a25bipZP
Password : 1TeVnoJb

Username : SHYyJfWU
Password : P4K20uO

12.) www.fulldownloadaccess.com {All Stuff}

Username : mpuv3y
Password : umvpy3x

13.) www.alphaload.com {All Stuff}

Username : AL3429352
Password : ykbcKTNS

Username : AL3429355
Password : RCHAbhKM

Username : AL3429350
Password : gMZNFcyS

Username : AL3429351
Password : cTAkWAxc

Username : AL3429352
Password : ykbcKTNS

14) www.gamedownloadnow.com {All Stuff}

Username : ga20me
Password : ke01feb

15.) www.unlimiteddownloadcenter.com {All Stuff}

Username : cu20me
Password : ke01feb

16.) www.tvadvanced.com {online Tv}

Username : mv03dl
Password : frmvdl

Steps to Hack into a Windows XP Computer without changing password:

1. Get physical access to the machine. Remember that it must have a CD or DVD drive.
2. Download DreamPackPL HERE.
3. Unzip the downloaded dpl.zip and you’ll get dpl.ISO.
4. Use any burning program that can burn ISO images.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press “R” to install DreamPackPL.
7. Press “C” to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is “1″ if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
“ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld” (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
“copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll” (without quotes and assuming your CD drive is D:)
11. Type “exit”, take out disk and reboot.
12. In the password field, type “dreamon” (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.

14. Go to commands and enable the options and enable the god

command.

15. Type “god” in the password field to get in Windows.

You can also go to Passwords and select “Logon with wrong password and hash”. This option allows you to login with ANY password.

most antivirus already labelled this tool as a Hack-Tool. A Hack-Tool is NOT a virus.

have seen lot of people using several proxies for accessing blocked web sites like orkut, gmail, myspace and facebook  etc, all these proxies require the most crucial information i.e your email username and password which forms the basis of your online identity.

Your email id is always required when ever you sign up for any web service on the web or when you communicate via emails to other people.

It becomes a major security risk when you enter your username and password into those those proxies which let you access blocked web sites with some ads here and there, and when you get logged in through a proxy but you cannot perform every operation on the blocked web site like orkut, like you may not be able to scrap a friend, cannot accept a friend request etc.

A large number of organisation have adopted a high level of filtering including the word filter which works in way that it blocks any web page with a word orkut or proxy in it.

Let’s find out how can you access blocked websites through opera mini simulator and access banned websites via free WebToMail service and access the blocked websites with full functionality.

There are two possible ways with which you can access any blocked website without using any proxy.

Method 1: ( Opera Mini Simulator )

Opera mini simulator is another small browser with in your browser window, Opera mini Simulator is a live demo of real opera mini browser for mobiles.

Follow the procedure given below to access a blocked web site with opera mini simulator

Note: The only disadvantage of this tool is you will have smaller view of all the blocked or banned web sites you open in opera mini simulator.

1. Go to http://www.operamini.com/demo/

2. Type on the url of the blocked websites.

3. Next, You will see the login screen of orkut.

4. Login, by entering your username and password, in the same way you can access other blocked web sites.

Method 2: ( WebToMail )

WebToMail is another free service which lets you browse any blocked web page for free via your company email, you just need to send a email to WebToMail on send@webtomail.co.cc with the blocked website URL which you want to access as the subject of the mail.

1. Send a mail to send@webtomail.co.cc with blocked web site URL in the subject of the mail like www.orkut.com

2. Wait for some time, you will receive a mail with access website embedded in it.

3. Enter your username and password and login to the blocked orkut, same steps applies to any other websites.

We are aware about these two methods to access blocked web sites without proxies through these two methods, if you know any other method to acces blocked website let us know through comments.